Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ALTERNATIVE CUTTING METHOD
a
a. Using template, mark 4 Cutting
Method holes on duct.
METAL DUCTWORK INSTALLATION
5
5. Remove backing
from mounting plate
adhesive gasket.
7
7. Secure the mounting plate using (8) #8
self-tapping screws.
9
9. Secure the unit to the
mounting plate
with (4) thumb nuts.
c
c. Cut between holes using tin snips.
1/4
b
b. Drill 4 holes where marked.
(CONTINUED)
6
6. Center openings and press mounting plate onto
duct. The adhesive gasket will hold the mounting
plate in place.
8
8. Insert unit into opening. Be sure the air will pass
though the ActivePure® cell honeycomb matrix.
10
10. Plug unit into working power receptacle.
Hard wiring unit into HVAC system must
be done by a licensed HVAC installer or
electrical contractor only.
5
Publicité
