Publicité
Les langues disponibles
Les langues disponibles
en - Technical data
Possible voltage options
208/240 V 60 Hz 3 Ph
Power source
Total amps
Maximum fuse rating (time-delay fuse)
Minimum current
Exhaust air
Airflow rate
Maximum permitted pressure loss
Maximum exhaust air temperature
Maximum evaporation rate
Exhaust air connector on machine side
As relative humidity inside the exhaust ducting can be as high as 100%, suitable measures must be taken to prevent a backflow of
condensate into the machine.
Supply air
Standard connection: air intake from installation site
Recommended free air intake cross-section into the room:
(equivalent to 3 times the exhaust air cross-section of a machine).
There must be sufficient air intake to the installation site to match the air outlet volume.
Alternative connection: air intake connection directly from outdoors
Connection sleeve on machine side (internal diameter)
Connection pipe provided on site (external diameter)
Removing the protective cover exposes live parts. For safety reasons, a pipe must be installed from the tumble dryer's central fresh air
intake (over a minimum length of 35 7/16" (900 mm)) and secured with 2 screws.
Equipotential bonding
Connection with male thread
Washers and nuts
Accessories for equipotential bonding are not supplied and need to be ordered separately.
APDR 002 communication box (optional accessory)
Electrical connection
Net height
Net width
Net depth
Gross height (including packaging)
Gross width (including packaging)
Gross depth (including packaging)
Net weight
Gross weight (including packaging)
16
208/240 V
60 Hz
3 Ph
51.2 A
70 A
64 A
740 m³/h
0.05 psi (350 Pa)
175°F (80°C)
50 lb/h (22.7 kg/h)
6" (DN 150)
146 sq. in. (942 cm²)
6 5/16" (161 mm)
6 5/16" (160 mm)
10 × 35 mm
M10
~ 200–240 V, 50/60 Hz
9 9/16" (243 mm)
11 3/4" (298 mm)
3 3/4" (96 mm)
5 11/16" (145 mm)
11 1/2" (292 mm)
23 7/16" (595 mm)
7.5 lb (3.4 kg)
8.274 lb (3.75 kg)
Publicité
