TechniSat DIGITRADIO Bike 1 Manuel D'instructions page 22

4.4 Mounting the DIGITRADIO Bike 1 on the bike
There are several ways to mount the DIGITRADIO Bike 1 on your bike, which are
explained below.
4.4.1 Handlebar mounting
The DIGITRADIO Bike 1 can be attached to the handlebars of your bike using the radio
holder and the quick release. First attach the quick release to the radio holder using
the 2 screws supplied.
Depending on the diameter of the handlebar tube, you can use the rubber
adapter in the quick release.
22
Radio
holder
Screws
Quick release