monzana 109172 Mode D'emploi page 5

• Caution – danger of crushing! When unfolding and folding the assembly stand, be careful not
to crush your fingers.
• Care must be taken to ensure that the bicycle is clamped at its centre of gravity. Otherwise
there is a risk that the bicycle loses its intended position.
INTENDED USE
The bicycle assembly stand has a load capacity of up to 50 kg and is suitable for 30-70 mm bicycle
frames. The height of the bicycle assembly stand can also be adjusted from 104 to 159 cm and it
can be rotated through 360°. Use the product only for the purpose it is intended for. The
manufacturer accepts no liability for damage caused by unintended use. Any modification to the
product may negatively impact safety, cause hazards and invalidate the warranty.
Only suitable for domestic use; not for commercial use.
UNPACKING INSTRUCTIONS
Open the box and remove the product. After unpacking, please check the product for damage
and to ensure it is complete. Subsequent complaints cannot be accepted.
MAINTENANCE AND CARE INSTRUCTIONS
Use a sponge and warm soapy water for cleaning prior to first use. Do not use cleaners or
detergents containing solvents; substances such as bleach can damage the product. You may find
further care instructions on the product. Regular cleaning, checking and maintenance increase the
item's safety and service life.
DISPOSAL
At the end of your item's long service life, please dispose of the valuable raw materials properly
so that proper recycling can take place. If you are not sure how best to proceed, the local waste
disposal companies or recycling centres will be happy to help.
5 www.DEUBAXXL.de