Adam Hall CAMEO Q-SPOT 40i Manuel D'utilisation page 7

SETTING THE OPERATING MODE (Mode)
Press MODE until the top line of the display shows "Menu". Now select the "Mode" option (bottom line) using UP and DOWN (note arrow)
and then press ENTER. You can now select the desired mode using UP and DOWN and then confirm with ENTER (see table, note submenus).
You can find detailed DMX tables in these instructions under "DMX CONTROL".
Mode
DMX = DMX operating modes
Slave = Slave mode
Auto = Automatic
control
mode
Static = Setting a "scene"
without an external
controller.
Color macro = Color macros
02CH 2-channel mode
03CH 3-channel mode
04CH 4-channel mode
09CH 9-channel mode
Slave Connect DMX IN on the slave unit to DMX OUT on the master unit (same
model) and enable one of the standalone modes on the master unit. The
slave unit will now follow the master unit.
Fade Color blending with speed setting (speed).
Program Combination of fade and jump operating mode with speed setting (speed).
Jump Rapid color change with speed setting (speed).
Static Master dimmer, dimmer fine, strobe (strobe function same as channel 3
in 9-channel mode), and the individual colors can also be individually set.
15 different color macros are available as presets.
7