Publicité
Les langues disponibles
Les langues disponibles
TROUBLE SHOOTING
Problem
The unit does not turn on
Flame effect is on, but there is no
flame effect
The heater does not blow warm air
Error Code E3 shown on the
indicator
Solution
a standard 120V grounded power
source. Press the power button on
the control panel.
fallen off from the spindle motor.
higher than the room temperature.
Turn all switches to OFF and
unplug the unit for 5 minutes.
operate as normal.
Reset the unit by unplugging the
unit from power source for 5
Use it closer to the unit / change
battery / remove insulating plastic
sheet.
29
EN
Publicité
