Costway FP10220 Mode D'emploi page 26

Heater Control
Press the heater control to turn on and off the heater.
When the heater is turned on, press and hold the heater control
button for 5 seconds to enter temperature adjustment mode. The
LED indicator is red. In adjustment mode, the display will flash.
There are 22 levels to change Fahrenheit temperature (ON, 62°F -
82°F). After this is set, the display will flash 5 times and exit from
setting status.
To switch from degree Fahrenheit to degree Celsius, press and hold
the power button for 5 seconds when the heater is turned on. The
LED indicator will turn to green. There are 12 levels to change
Celsius temperature (ON, 17°C - 27°C). Repeat the same process to
convert Celsius to Fahrenheit.
NOTE: Degree Fahrenheit will be displayed in RED and degree
Celsius will be displayed in Green.
Timer Control
Press the timer button to turn the timer on. The timer function can
controls both the flame effect and heater.
The timer can set as the table suggested below.
Button Press
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
NOTE: Timer only controls heater if only the heater is on before timer
is set.
NOTE: Timer only controls flame effect function if only the flame
effect function is on before timer is set.
NOTE: Timer can control both heater and flame effect function if both
are on before timer is set.
Timer Interval
30 Minutes
1 Hour
2 Hours
3 Hours
4 Hours
5 Hours
6 Hours
OFF
26
Display
30
1h
2h
3h
4h
5h
6h
None
EN