VOLTWERK VS 3 Manuel De Service page 99

5 Installation
Result
36
All manuals and user guides at all-guides.com
3. Place the contact socket (2) in the crimping die. Use the
positioning aid.
4. Guide the stripped wires into the contact socket.
5. Press the gripper together tightly.
6. Repeat the process for all wires.
The cable is crimped.
Connecting the solar power system cable
(5)
1. Push the connector plug (4) or connector socket (3) onto
the crimped cable (5). A clicking noise confirms a correct
connection.
Operating manual
(2)
Voltwerk VS 3, 4, 5
(4)