Télécharger Imprimer la page

auna multimedia Areal Bar 700 Mode D'emploi page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Connecting mains power
Connect the attached mains plug to a mains power supply outlet. Switch the power outlet ON.
Standby Mode
Press the STANDBY button (U2 Unit & R3 Remote). to wake the unit from STANDBY mode.
To enter STANDBY mode press either STANDBY buttons (U2 Unit & R3 Remote).
NOTE: As part of the power saving mode the unit will enter STANDBY mode automatically after 10
minutes (approx) of no audio output.
Playing audio from a connected TV or other devices
After connecting a TV or other device to the Sound bar, follow the below steps.
Ensure the Sound bar is powered ON. If not press the STANDBY button (U2) or remote (R3).
Press the SOURCE button (U3,R2) repeatedly to choose the correct source to play. The source icon will
appear on the display.
Adjust the output volume using the VOLUME +/- buttons (U6 Unit or R5 Remote).
Digital Audio Connections: Please note when connecting the soundbar using DIGITAL cables (COAXI-
AL or OPTICAL), the AUDIO SOURCE MUST be set to output PCM digital audio.
Adjusting the Sound
Press VOL+/- to adjust the output volume level.
Press AUDIO MODE (on the RC) repeatedly, to select from the available audio modes STANDARD,
MOVIE, MUSIC or NEWS.
Press B+/- to adjust the bass level.
Press mute to mute the output. Press again to un-mute.
22
All manuals and user guides at all-guides.com
Operation
General Operation

Publicité

loading

Ce manuel est également adapté pour:

10026465