auna multimedia Areal Bar 700 Mode D'emploi page 19

Step 1:
Align the Sound Bar in the chosen location. Use a
pencil to mark the drilling positions 750mm apart.
NOTE: The Sound Bar should be located at least
7.5cm below the bottom of the TV.
Step 2:
Drill holes as marked in step 1.
All manuals and user guides at all-guides.com
Wall Mounting Advice
Step 3:
Insert 2 screws (not supplied) into the holes and
tighten. Take care to leave 5mm between the screw
heads and the wall.
NOTE: You will need to ensure the screws are
long enough to sufficiently grip the wall while
allowing 5mm between screw head and wall.
Step 4:
Hook the Sound bar into the screws. For secure
mounting ensure the crew heads slide firmly into
the narrow part of the brackets:
.
19