Argo LILIUM 11 Mode D'emploi page 19

LED TIMER
LED TANK FULL
LED DEFROST
LED CHILD LOCK
HIGH-LOW FAN
SPEED LED
"+" AND "-"
(3)
BUTTON
BUTTONS
(1) ON/OFF BUTTON
Press this button to turn the dehumidifier on and off.
(2) MODE BUTTON
Press this button to enter the mode selection state: the corresponding led will light on. Press "+" or "-" button to set
the mode; the current mode led will flash. You can select 4 different modes: Deumidify, Automatic, Continuous and
Fast dry clothes. Press the mode button again to confirm the mode selection.
(3) "+" & "-" BUTTON
Press this button to set the humidity, timing and dehumidification mode.
The humidity can be set only in dehumidify mode from 30% to 80% by pressing these buttons.
The timer can be set from 1 to 24 hours by pressing these buttons.
The dehumidification mode can be set by pressing MODE button and then "+" and "-" buttons; the corresponding led
indicator lights on.
(4) FAN BUTTON
Press this button to set the fan speed: high and low speed; the corresponding led lights on.
NOTE: This button is valid only when DEUMIDIFY and FAN mode are set.
(5) TIMER ON/OFF BUTTON
Press this button to set the timer from 1 to 24 hours.
If the timer is set to 0 and you press TIMER button or there is no operation in 5 seconds, the dehumidifier will
automatically enter the time off work state.
If the timer isn't set to 0 and you press TIMER button, the dehumidifier will automatically enter the time off work
state and led lights off; if you don't press the TIMER button and there is no operation in 5 seconds, the time will set
automatically and LED TIMER lights on. After 5 seconds, the humidity level will return on display.
V 06/17
All manuals and user guides at all-guides.com
CONTROL PANEL
DISPLAY
(5) TIMER
BUTTON
OPERATION LED
(2) MODE BUTTON
(4) FAN
BUTTON
(1) ON/OFF
BUTTON
(3)
19