nedis WIFILOFC20FBK Guide De Démarrage Rapide page 6

7. Fasten A
5
8. Attach the product to A
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap
Continue.
You will receive a verification code on your e-mail address.
4
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.
Connecting the app
1. Make sure Bluetooth is enabled on your smartphone.
2. Open the Nedis Smartlife app on your smartphone.
3. Register or login to your account.
4. Tap + in the top right corner.
5. Insert the power plug into a power outlet.
6. Select the product type you want to add from the list.
The LEDs A
4
If the LEDs are not blinking, switch on the product, and
4
after 10 seconds, switch the product off and on 3 times to
manually enter the pairing mode.
7. Follow the instructions in the app.
PIR sensor control (WIFILOS20FBK only)
After connecting the device with the app, the control page
opens automatically.
1. Tap on Sensor to enter the sensor control menu.
2. Switch the sensor on or off.
3. Set the detection distance.
4. Set the detection sensitivity.
5. Set the light duration after detection.
PIR sensor stand-by light (WIFILOS20FBK
only)
1. Activate the Slight bright option in the sensor control menu
2. Set the stand-by light brightness.
3. Set the stand-by light duration.
The product enters stand-by mode after the full light
4
duration.
to the wall with screws.
5
blink to indicate pairing mode is active.
1
by fastening A
6
4 .