Bissell POWERFRESH Mode D'emploi page 5

A
Product View
Do not plug in your steam mop until you are familiar
with all instructions and operating procedures.
1 Steam-on-Demand Trigger
2 Strain Reliever Handle™
3 Quick Release™ Cable Wrap
4 Removable Water Tank
5 Lower Cable Wrap
6 Smart Set™ Steam Control
7 Manoeuvrable Swivel Head
8 Removable & Washable
Easy Scrubber
9 Low Profile, Edge-Cleaning
Mop Head
B
Assembly
Your PowerFresh™ Steam Mop assembles
quickly and easily. It is packaged with the
following items:
Handle Assembly with one screw
Lower Body
Manoeuvrable Mop Head
Removable Water Tank (Comes
With Replaceable Water Filter
on Select Models) (A)
The water tank is located on the top of the
PowerFresh™ Steam Mop. It can be refilled
with water any time during use. Distilled or
demineralised water is recommended. On
select models, this tank is connected to a
removable, replaceable water filter that
prolongs the life of your steam mop by
filtering out tap water minerals.
Removable Easy Scrubber
(Attached to Mop Head)
Clean sticky messes by pressing the Easy
Scrubber with your foot and locking it into
position. Clean grout and crevices with this tool.
2 - PowerFresh™ Microfibre Mop Pads
Reusable microfibre mop pads are machine
washable and safe for virtually all hard floor
surfaces. Your PowerFresh may have come
with two different pads. The white microfibre
pad is best for everyday use on delicate
flooring like sealed hardwoods and laminate.
The grey and white striped pad can be
used for scrubbing heavily soiled floors and
cleaning tougher messes.
Do not use chemicals in the water tank of your
PowerFresh Steam Mop.
All manuals and user guides at all-guides.com
2 - Spring Breeze Fragrance Discs
1. Attach lower body to mop head by
snapping it into place.
2. Slide handle assembly down and screw
until tightened.
PowerFresh™ Steam Mop assembly
is complete.
10 Washable Microfibre
Mop Pads
11 Carpet Refresher
Attachment
Getting ready
12 Spring Breeze Fragrance
The mop pad may have already come
Discs Replacement Pack
attached to the mop head, if not follow
(2-pack)
steps 1A and 1B below.
13 Water Filter Replacement
1. Add Freshening Disc and Attach Mop Pad
14 Removable Water Tank With
Replaceable Water Filter
2. Fill the water tank
For tank without filter
For tank with filter
3. Twist the Quick Release™ cable wrap
clockwise to unwrap the power cable
completely and plug into a 220-240 Volt
electrical socket as described on the
Important Safety Instructions, page 4.
4. SmartSet™ Steam Select Indicator light
will glow when PowerFresh™ Steam Mop is
ready to use. Press the Steam Level button to
choose the level of steam you desire. Depress
the Steam-on-Demand trigger located on the
handle to begin steam cleaning.
C
Operations
a. Insert Spring Breeze Freshening Disc
into pocket inside mop pad. Use the
whole disc for a refreshing scent or
cut in half for a lighter scent.
b. Set mop head in mop pad, making
sure quick-grip release tab is located
on the back.
a. Remove tank by lifting straight up
and away from unit.
b. Unscrew cap at bottom of water tank.
c. Fill water tank with water.
For best results, water should
be at room temperature.
d. Replace the cap, tighten until snug.
e. Replace water tank by gently sliding
tank into place and press down firmly.
f. Remove tank by lifting straight up
and away from unit.
g. Press down on the Filter Release
Button and slide filter forward to
access Water Tank.
h. Fill tank with water. For best results,
water should be at room temperature.
i. Slide Filter back onto the Water Tank
until it clicks into place.
j. Replace water tank by gently sliding
tank into place and press down firmly.
www.BISSELL.com
5