Koshin GEH-3100DX Instructions page 17

GENERAL
This publication, which contains an illustrated parts breakdown, has been prepared as an aid in locating those
parts which may be required in the maintenance of the unit. All of the parts listed in the parts breakdown are
manufactured with the same precision as the original equipment. For the greatest protection always insist on
genuine Koshin America parts for your generator.
NOTE: Koshin America can bear no responsibility for injury or damages resulting directly from the use of non-
approved repair parts.
Special order parts may not be included in this manual. Contact the local Koshin Parts provider with the unit
serial number for assistance with these special parts.
DESCRIPTION
The parts breakdown illustrates and lists the detailed parts which make up this particular machine. This covers
the standard models and the more popular options that are available. The part number, the description of the
part and the quantity of parts required are shown on each illustration.
The quantities specified are the number of parts used per one assembly and are not necessarily the total
number of parts used in the machine. Where no quantity is specified the quantity is assumed to be one.
Each description of a part is based upon the "noun first" method, i.e., the identifying noun or item name is always
the first part of the description. The noun name is generally followed by a single descriptive modifier. The
descriptive modifier may be followed by words or abbreviations such as upper, lower, inner, outer, front, rear,
RH, LH, etc. when they are essential.
MARKINGS AND DECALS
NOTE: Do not paint over safety warnings or instructional decals. If safety warning decals become illegible,
immediately order replacements from the factory.
Part numbers for original individual decals and their mounting locations are shown within Parts List Section.
These are available as long as a particular model is in production. Afterwards, service sets of exterior decals
and current production safety warning decals are available.
HOW TO USE PARTS LIST
•
Turn to Parts List Section.
•
Locate the area of the machine in which the desired part is used and find illustration.
•
Locate the desired part on the illustration by visual identification and make note of part number and
description.
HOW TO ORDER
The satisfactory ordering of parts by a purchaser is greatly dependent upon the proper use of all available
information. By supplying the nearest sales office, autonomous company or authorized distributor, with
complete information, you will enable them to fill your order correctly and to avoid any unnecessary delays.
In order that all avoidable errors may be eliminated, the following instructions are offered as a guide to the
purchaser when ordering replacement parts:
• Always specify the model number of the machine.
• Always specify the serial number of the unit. THIS IS IMPORTANT.
• Always specify the number of the parts list publication.
• Always specify the quantity of parts required.
• Always specify the part number, as well as the description of the part, or parts, exactly as it is given on the
parts list illustration.
0069297
PARTS ORDERING
17
English