Oregon Scientific RAR813 Mode D'emploi page 7

SENSOR DATA TRANSMISSION
To manually search outdoor sensor:
Press and hold MODE and
The reception icon of the outdoor temperature shows
the status as follows,
ICON
TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
MANUALLY SET CLOCk
To set the clock manually:
1. Press and hold MODE.
. Press or
and hold these buttons to rapidly set the values.
3. Press MODE to confirm.
4. The settings sequence is 1/4 hr format, hour,
P/N:300103599-00001-10 REV1.0
Page:7/88
All manuals and user guides at all-guides.com
at the same time.
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be found.
to change the settings. You can press
minute, year (Y), calendar mode (day (D) – month
(M) / month (M) – day (D)), month, day and
weekday language.
NOTE
The language options are E (English), F
(French), D (German), I (Italy) and S (Spanish).
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.
TEMPERATURE
To select the temperature display unit:
Press the °C / °F button to select the desired unit.
To toggle between each outdoor sensor's readings:
Press CH repeatedly.
OR
Press and hold MEM and
auto-toggling of outdoor channels.
OR
To end press .
To toggle between current, minimum and
maximum records:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
6
for  seconds to initiate