Publicité
Les langues disponibles
Les langues disponibles
STEP 27
TIP:
To install Roof Corner Cap (Part 13), start by
locating the end pin into the receiving hole of the
2nd Tier Corner Rafter (Part 37) leg. Once the pin is
inserted, swing the Roof Corner Cap down into
position. When properly placed the studs will align
with the holes and the slots on the sides are aligned
with the ridges on the roof panels. For a video of
this method, scan the QR code provided.
13
13 14
TIP:
Make sure the slots on the corner
caps are lined up with the roof
ridges before fastening the nuts.
You can slide the corner cap
slightly to get the position
correct before tightening.
All manuals and user guides at all-guides.com
37
13 14
X4
13
X8
G
H
E
G
13
13
NOTE:
Install all nuts by hand loosely
threaded BEFORE fully tightening
any nuts. Once all nuts are installed
loosely, then secure the nuts before
moving on to the next step.
SKYLINE 12'X14' DOUBLE-TIER GAZEBO
X4
14
X8
H
X8
E
14
14
41
Publicité
