Beta 1760/IR800 Mode D'emploi page 25

All manuals and user guides at all-guides.com
MODE Selection Key Function
Pressing. this. button. also. enables. access. to. the. Emissivity. set. up. function.
(EMS),activation/de-activation of the continuous measurement mode, of the
activation/de-activation and regulation of the high (HAL) and low (LAL)
alarm. Each time you press the selection MODE key, the instrument passes
to the subsequent function. The diagram shows the cycle sequence of the
various.modes.
EMS adjustment.
The Emissivity(EMS) is digitally adjustable from 0.10 to 1.0.
Activation/De-activation mode for CONTINUOUS MEASUREMENT
The.continuous.measurement.mode.is.particularly.useful.for.the.continuous.
monitoring of temperature. Press the "up" and "down"keys to activate it/de-
activate it. Press the measurement push button (trigger) to confirm continuous
measurement.mode..The.instrument.continues.to.display.temperature.even.if.
the.trigger.is.not.pressed.again.
In the continuous measurement mode, press the up and down keys to adjust
emissivity or activate/de-activate the high (HAL) low (LAL) alarm. Press the
measurement button (trigger) to confirm the High/Low alarm method.
High/low Alarm Regulation
from.-50.to.800 .o C(-58℉ ~ 1472℉)

EMS
Lock.
on/off
Hal
.on/off
HAL
Low.
on/off
Low