B&K Precision SEFRAM 7212 Manuel Utilisateur page 53

3.9 10A current
4. Insert the red probe into the "
probe into the
5. Turn the knob switch to the " " position and press the
key
6. to switch the AC current, DC current or frequency
measurement.
7. Connect the measurement probe in series to the load, and
the polarity of the red probe connection will be displayed
when the current value is displayed.
Warning
1. Before turning the function rotary switch, leave the
measurement probe from the circuit under measurement.
2. When the screen only displays "OL", it means that the
range has been exceeded and a higher gear range should
be switched for measurement.
3. Do not input a voltage with an effective value higher than
600V, otherwise there is a risk of damaging the instrument.
4. Do not input a current with an effective value higher than
600uA, otherwise there is a risk of damaging the
instrument.
jack.
：
Measurement instructions
" jack and the black
53