Publicité
Les langues disponibles
Les langues disponibles
3.4Resistance/Continuity/diode/capacitance measurement
4.
Insert the red probe into the "
into the
5.
Turn the knob switch to the "
key to switch the measurement of resistance, connectivity, diode
and capacitance.
6.
Connect the probe to the measured object and read the
measurement result from the display.
Attention
1. Before turning the function rotary switch, leave the
measurement probe from the circuit under measurement.
2. When the screen only displays "OL", it means that the range
has been exceeded and the measurement should be
terminated.
3. Do not input AC voltage with effective value higher than 600V,
otherwise there is a risk of damaging the instrument.
4. When
measuring
capacitance before measuring.
jack.
：
large
Measurement instructions
" jack and the black probe
" position and press the
capacitance,
47
discharge
the
Publicité
