Kolpin 89475 Mode D'emploi

89475
Parts List:
Item Description
1 Mounting Base Plate
2 Mounting Bracket Plate
3 Molded Tank Bracket
4 ¼" x ¾" Truss Head Bolt
5 ¼" – 20 U-Bolts
6 ¼" Washers
7 ¼" - 20 Nylock Nut
8 Rubber Caps
9 T-Knob
Note: For mounting a full size Fuel/Water Pack, you will need
to use 2 Pack Brackets, where if you mount a Fuel/Water
Pack Junior, 1 Pack Bracket is required.
ATV Usage:
Before assembling the mounting bracket to anything, be sure to align the fuel or water cell to
the position desired to make a sure fit. Once confirmation of fit is achieved, locate the position of
the Mounting Bracket and mount to ATV rack using the U-Bolts, Washers and Nuts provided. The
mounting plate is also compatible with the Gear Lock and Load plate (P/N – 26300 SOLD
SEPERATELY) which allows you to quickly and easily add and remove virtually all Kolpin
Accessories. To attach the bracket to you ATV, simply place the (3) U-Bolts provided on the
bottom side of the Rack and up through the Mounting Plate. Then place the (6) Washers on the U-
Bolt so it sits flat on the Mounting Plate. Tighten securely using the (6) Nylock Nuts Provided. The
Rubber Caps are then placed over the protruding threads of the U-Bolts.
UTV Usage:
To use the Fuel Pack Bracket on your UTV, the 26400 - Utility Gear Rail System is needed.
Rev. 4
– Fuel/Water Pack Bracket Instructions and Applications
Fuel Pack Not Included
Quantity
1
1
1
8
3
10
14
6
1
Spare P/N
- - -
- - -
89435
89435
79750
79750
79750
79750
79475