Rothenberger ROAIRVAC R32 1.5 Instructions D'utilisation page 17

18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
1.2 Special safety instructions
This device is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This device can be used by children aged 8 and
above and by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a person re-
sponsible for their safety supervises them or has instructed
them in the safe operation of the device and they understand
the associated dangers. Otherwise, there is a danger of operat-
ing errors and injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the device.
The equipment must only be operated by qualified specialized
staff!
Unit is intended for operator professionally well trained, he must know refrigeration foundamen-
tals, cooling systems, refrigerants and possible damages that equipments under pressure could
cause.
Read carefully instructions in the literature, strict observance of procedures is main condition for
operator safety, constant declared performances and unit undamaging.
Wear safety glasses and gloves when handling refrigerant; avoid contact with refrigerant, blind-
ness and injuries may result to operator.
Keep away from flames and hot surfaces; high temperature decomposes refrigerant releasing
toxic contaminants very dangerous for environment and operator.
Avoid skin contact; refrigerant has a very low boiling temperature (approx. -18° C / -3° F) and
freezing may occurs.
Avoid inhaling vaporized refrigerant gas; it has a narcotic effect.
Vacuum pump must always be suitably earthed.
Even if the pump temperature is not expected to rise a high level during use, it is advisable to lo-
cate the unit so that users cannot make contact with the casing, as burns may result.
Vacuum pump is air cooled with integral fan; use only where air can freely circulate.
All manuals and user guides at all-guides.com
ENGLISH 13