Publicité
Les langues disponibles
Les langues disponibles
1st
* Tape measure is always located below the measuring point*
2nd
All manuals and user guides at all-guides.com
3rd
4.
Starting at the outer most locations dry fit
the remaining pedestals using masking
tape or re-usable tape strips supplied to
temporarily hold them in position.
The positions of the pedestals are shown in the
illustrations. Use the center mark on the
leading edge of the pedestals for accurate
measuring. The fingers incorporated on the
leading edge of the pedestal will help ensure
the correct position relative to the hood edge.
When correctly positioned the fingers should
contact the leading edge of the hood.
HD 13S14 Rev0.Dec22, 2017
Page 2 of 11
Publicité
