Domo DO705BL Mode D'emploi page 35

PARTS
1. Lid
2. Control panel
3. On-off button 'START/STOP'
4. Setting button 'SELECT'
5. LED Display
6. Indication chuncky-function
7. Indication smooth-function
8. Indication extra smooth-function
9. Indication juice-function
10. Indication jam-function
11. Indication blend/clean-function
12. Jug
13. Power socket
14. Overfill sensor
15. Blade
USE
Note: Before using the device, clean it with a moist cloth.
1. Ensure the soup maker is unplugged before adding the ingredients.
2. Remove the lid. Be careful not to touch the blade.
3. Place all the ingredients in the soup maker.
4. Add the water or broth last, filling it up to between the min and max indication lines.
Make sure that the appliance is always filled between the minimum (1200 ml) and
maximum (2000 ml) indicators.
5. Place the lid back onto the jug. Ensure it is securely in place.
6. Plug the cable in the power socket at the bottom of the handle. The indicator lights will
blink one by one.
7. Select the required program (chunky/smooth/extra smooth/juice/jam/blend-clean) by
pressing the setting button 'SELECT'. Confirm with the start button 'START/STOP'. The
LED screen has a countdown timer.
Attention: the jug will heat up.
8. When the programme is finished, a signal will sound for one minute. Be careful when you
pour out the soup!
www.domo-elektro.be
2
1
14
12
15
4
SELECT
START
STOP
5
3
13
6 7 8
CHUNKY SMOOTH EXTRA
SMOOTH
JUICE JAM BLEND/CLEAN
9 10 11
35
DO705BL