Publicité
Les langues disponibles
Les langues disponibles
1. Insert the handlebars into the stem
without trapping the power cables.
Handlebar mounting
2. Attach the handlebar using the 4 screws provided. Use
Stem/brake maintenance
the M5 key to attach your handlebars to your scooter.
Make sure it is secure and the handlebars are stable
before using your scooter.
1. If you feel the brakes are too tight, please use the
M5 hex key to loosen the screws of the plate on
the disc brake, bring the brake cable back to
make the length slightly shorter, and lock the
screws of the plaque ; If you feel the brake is too
loose, loosen the plate screws, slide the brake
cable to make the length slightly longer, and then
lock the plate screws.
2. If the scooter stem is shaking, please use the M5
hex key to lock the two screws of the folding
mechanism.
3. Before adjustment, make sure the scooter is
stable and secure to prevent tipping.
29
Publicité
