Publicité
Les langues disponibles
Les langues disponibles
The product is designed to sit in the wall-mounted bracket vertically.
1.
Select an installation position located in the proximity
of the electrical outlet.
2.
Fix the provided wall bracket using suitable screws
and wall plugs (not supplied).
Note: Do not drill into any pipes or mains cables beneath
the surface during mounting holes preparation. The fixing
points must be capable of supporting the full weight of the
product.
5. USE
Operating the vacuum cleaner
1.
Insert the plug of the power cable into an electrical outlet.
2.
Switch the I/O power switch to the "I" position to turn the appliance on.
3.
After using the appliance, switch it off by pressing the I/O power switch to "O".
4.
Empty and clean the dust cup.
Accessories
Before changing the nozzles, always switch the vacuum cleaner off first.
1.
Floor nozzle
2.
2-on-1 tool:
■ Brush nozzle
6. MAINTENANCE AND CLEANING
Always switch off the appliance, and remove the mains plug from the wall socket before emptying
the dust cup.
1.
Do not submerge the appliance, and its supply cord in water or other liquids.
2.
Avoid corrosive liquids and materials. Do not use any abrasive cleaners, chemicals, glass
cleaners, universal cleaners, disinfecting agents or oil-based maintenance agents! Those
products may damage the appliance.
3.
Do not disassemble or modify the appliance. Changes or modifications will void the user
warranty.
WARNING: This appliance does not stand up on its own. After vacuuming, disassemble the
4.
appliance, and wind up the supply cord. Store the product safely away on level ground when
not in use.
5.
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local council for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health
and well-being. Please contact your local council or regional authority for more information
on the collection, reuse, and recycling programmes.
Emptying the dust cup
1.
To empty the dust cup while it is attached to the main body, position the dust cup over a
dustbin and unlock the dust cup bottom cover release button.
2.
Empty the dust cup and close the cover.
Removing and cleaning the dust cup
1.
To remove the dust cup from the main body, press the dust cup release button. Tilt the dust
cup and lift it off to remove.
2.
Hold the dust cup over the dustbin and unlock its bottom cover release button.
3.
Empty the dust cup from dust and debris.
4.
Remove the dust screen with the filter from the dust cup.
5.
To clean the interior of the dust cup, rinse it with water. Let it dry completely.
■ Crevice nozzle
9
EN
Publicité
