Publicité
Les langues disponibles
Les langues disponibles
• Before plugging into a socket, check that the voltage in your
home corresponds with the voltage printed on the appliance.
• The safety during use can only be guaranteed when the cooker is
installed correctly and according to the regulations. The installer
is responsible for any damage caused by a faulty installation.
• The gas connection must comply with the national and local
safety regulations. The gas connection must be made by
qualified installer.
• The electrical connection must be made by a qualified
electricien. This person is aware of the national and local
regulations the installation must comply with.
• The appliance falls under protection class I and can only be used
in combination with a grounding conductor connection. The
manufacturer accepts no responsibility for any malfunction or
damage caused by incorrect electrical installations.
• The appliance must be connected to a fixed installation and the
means of disconnecting it from the fixed installation must be
installed according to the installation instructions.
• The connection cable must hang freely. Do not tie the power
cable or pass it along sharp edges. It must be positioned so that it
does not touch any of the hot parts of the cooker.
• The connection point, the wall socket and/or plug must always
be accessible.
• Never immerse the power cord and plug into water or any
other liquid to protect yourself against electrical hazards.
• If the appliance is used for other purposes than intended, or is it
not handled in accordance with the instruction manual, the full
responsibility for any consequences will rest with the user. Any
damages to the product or other things are not covered by the
warranty.
• Should you decide not to use the appliance anymore, make it
inoperative by cutting the power cord after removing the plug
from the socket. We also recommend making all potentially
dangerous parts of the appliance harmless, particularly for
children who might be tempted to play with it.
•
Legislation requires that all electrical and electronic
equipment must be collected for reuse and recycling.
Electrical and electronic equipment marked with the
symbol indicating separate collection of such equipment
must be returned to a municipal waste collection point.
24
English
•
Publicité
