PC Display
Setting Up Your PC Software (Based on Windows XP)
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode
IBM
VEAS
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
may be different depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all
cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on "Control Panel" on the Windows start menu.
2.
When the control panel window appears, click on "Appearance and Themes" and a display
dialog-box will appear.
3.
When the control panel window appears, click on "Display" and a display dialog-box will appear.
4.
Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box,
the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
Resolution
Horizontal
Frequency (kHz)
640 x 480
31.469
720 x 400
31.469
640 x 480
37.861
640 x 480
37.500
800 x 600
37.879
800 x 600
48.077
800 x 600
46.875
1024 x 768
48.364
1024 x 768
56.476
1024 x 768
60.023
1360 x 768
47.712
Vertical
Frequency (Hz)
59.940
70.087
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
English-23
Pixel Clock
Sync Polarity
Frequency (MHz)
25.175
28.322
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
(H/V)
- / -
- / +
- / -
- / -
+ /+
+ /+
+ /+
- / -
- / -
+ /+
+ /+