Changing Channels
Adjusting the Volume
Viewing the Display
Using the Channel Buttons:
1.
Press the CH
or CH
CH
When you press the
You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels).
You will not see channels that were either erased or not memorized.
Using the PRE-CH Button to select the Previous Channel:
1.
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use the number button
to select the second channel. Then use the PRE-CH button to quickly alternate between them.
1. Press the VOL
or VOL
Using MUTE
button:
At any time, you can temporarily cut off the sound using the MUTE
1. Press MUTE and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE
Press the INFO button on the remote control to view current channel and the status of certain
audio-video settings.
Press the button once more or wait approximately 10 seconds and it disappears automatically.
English-12
button to change channels.
or CH
button, the TV changes channels in sequence.
button to increase or decrease the volume.
button again, or simply press the VOL
button.
or VOL
button.