RC Factory S-IDEE 144010 Manuel De L'utilisateur page 23

1. Turn on the power switch
flashes red, then turn on the model car's power switch.
2. Gently trigger the remote control to observe if the car can move
forward and backward.
3. Turn the remote control steering wheel
that the front wheel's steering follows the command.
4. The model car on the ground, and standing behind the model car, gently hook
the remote control throttle trigger
rotate the remote control front wheel trim
the front wheel Turn the trim to the left, the model car leans to the left, and the
front wheel trims to the right to rotate until the model car can go straight.
5. Throttle speed adjustment
right, hook the trigger model car speed becomes faster, turn left, hook the
trigger model car speed becomes slower.
6. If everything opperates OK, the SPEED RC is ready to run.
Power switch
on the remote and make sure the power indicator
can adjust the model car speed, rotate to the
Power LED
ST. TRIM
TH. D/R
to the left or right and make sure
, if the model car does not go straight,
, the model car to the right side,
Steering
regulating wheel
Trigger
The remote
control battery
cover