Télécharger Imprimer la page

Bosch 02811917 Notice Originale page 17

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth
in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
A)
Impact rate
Impact energy per stroke according to EPTA-Pro-
cedure 05:2016
Rated speed
Tool holder
®
Bluetooth
Low Energy Module GCY 42
Max. drilling diameter:
– Concrete
Bosch Power Tools
Intended Use
The power tool is intended for hammer drilling in concrete,
masonry and stone, as well as for chiselling work.
With the Bluetooth® Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth® wire-
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
(2)
(3)
®
, a
(4)
(5)
(6)
(7)
®
in the vicinity of
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
–1
min
J
–1
min
mm
SDS max drill chuck
SDS max tool holder
Dust protection cap
Locking sleeve
Mode selector switch
Vibration damping
Lock-on button for on/off switch
Handle (insulated gripping surface)
On/off switch
Worklight
a)
Rechargeable battery
Auxiliary handle (insulated gripping surface)
Rechargeable battery release button
User Interface
®
Cover for GCY 42 Bluetooth
Low Energy Module
Battery charge indicator (user interface)
Rapid shut-off indicator (user interface)
Working modes indicator (user interface)
Button to select the working mode (user interface)
Power tool status indicator (user interface)
Smartphone symbol (user interface)
Temperature indicator (user interface)
GBH 18V-45 C
3 611 J13 0..
18
0–2,740
12.5
0–300
SDS max
B)
45
1 609 92A 7MR | (09.11.2022)
English | 17
a)
GBH 18V-45 C
3 611 J13 1..
18
0–2,740
12.5
0–300
SDS max
C)
45

Publicité

loading