Nexgrill 720-0830MB Instructions D'opération page 10

Match Light
1.If the burner will not light after several attempts then
the burner can be match lit, before using the match
allow 5 minutes for any accumulated gas to dissipate.
2.Clip a match on one end of the lighting rod.
3.Light match.
4.Hold lighting rod and insert lighted match right next
to the burner ports or ceramic file.
5.Push and turn the designated control knob to
6.Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill.
Main burner
2
.
3
Main Burner
2
Push In
3
Control Knob, Label
10
Push In
Component Identification