HURAKAN HKN-ICF35D Mode D'emploi page 17

1. ON/OFF SWITCHING: Connect the power cable to the wall outlet (220 V and 50
Hz); a sound signal will appear, the "OFF" inscription will appear on the screen,
the ON/OFF LED will be flashing. Press the ON/OFF button, the "ON" inscription
will appear on the screen, the ON/OFF LED will light up in continuous red color.
Now, it is possible to press the "POWER" button or the "TEMP SET" button to
transfer to the corresponding heating mode.
2. POWER: When the "ON" inscription appears on the screen and the ON/OFF LED
lights up in continuous red color, press the "POWER" button: The "1800" inscription
will appear on the digital screen, and the "WATT" inscription will come on in red
color. The cooker is in the POWER heating mode. You can adjust the heating power
by pressing "+" and "-" buttons. Heating power levels: 400 W, 600 W, 800 W, 1,000
W, 1,200 W, 1,500 W, 1,800 W, 2,100 W, 2,400 W, 2,700 W, 3,000 W, 3,300 W,
3,600 W.
3. TEMPERATURE SETUP: When the "ON" inscription appears on the digital screen,
the "ON/OFF" LED comes on in continuous red color, press the "TEMP SET" button,
the "130" inscription will appear on the digital screen, and the "°C" LED will come on
in red color. The cooker is in the "TEMP SET" heating mode. You can adjust the
temperature by pressing "+" and "-" buttons. Temperature levels: 60 °C, 80 °C, 100
°C, 120 °C, 130 °C, 140 °C, 150 °C, 160 °C, 170 °C, 180 °C, 200 °C, 240 °C, 280 °C.
4. TIME SETUP: When the device is in the "POWER" or "TEMP SET" mode, press the
"TIME SET" button, the "0.00" inscription will appear on the digital screen, and the
"MIN" LED will come on in red color. Press the "+" and "-" buttons to set up time in
minutes from 00 to 59. Repeatedly press the "TIME SET" button, "0" will appear on
the digital screen.
5. Press the "+" and "-" buttons to set up time in hours from 0 to 23. While time setting,
you can press and hold down the "+" and "-" buttons for accelerated scrolling the digits.
In case of triple pressing the "TIME SET" button, the time setup will get canceled, and
the device will return to the previous heating mode. Upon completion of time setting,
the device will return to the previous heating mode, and the reverse time count will
start. Upon completion of counting, the cooker will automatically get switched off. For
checking time, press the "TIME SET" button.
6. POWER SUPPLY SWITCHING OFF: Press the "ON/OFF" button, the heating will
stop, and the cooker will transfer to the standby mode.
6. FAULT CODES
CO
FAULT
DE
E0 Central control unit is faulty
E1 Dishware is missing
E2 Too low power supply voltage
All manuals and user guides at all-guides.com
CODE FAULT
Error in operation of the cooker
E5
or central control unit
E6 Current overload
Circuit break or short-circuit of
E7
IGBT (insulated-gate bipolar
EN
17