Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Fax +1 305 430 9692
SPICE CONTAINERS
Before seasoning your meals, you can adjust the fineness of the
•
ground salt / peppercorns or spices, by turning the adjustment collar
(4) on the base of each container.
To do so, turn the collar clockwise for a coarser grind and
•
counterclockwise for a finer grind.
The coarseness adjustment can be done through 5 positions, each
•
marked with a distinct click sound. You can also select intermediate
grinding positions in addition to the marked positions.
Do not force the collar beyond the normal "Stop" setting.
•
Note: you can also use the spice containers to grind, manually, without
the motor block. Just keep the lid on and turn the lid clockwise to grind
(in this case the LED light will not light up)
ATTACHING THE SPICE CONTAINERS
Remove the motor block from the charging base by turning it
•
clockwise and lifting it.
Remove the lid of the container that you want to use.
•
Align the arrow on the motor block with the "Unlock" symbol on the
•
container.
Lock in place by turning the motor block counter clockwise, until the
•
arrow reaches the "Lock" symbol.
Grind the desired quantity of spice.
•
Proceed reversely to remove the spice container in place.
•
USE
With a spice container (5) attached to the motor block (7), hold the
•
appliance above the meal to season.
Press on the grind switch (8).
•
A LED light underneath each mill enables you to see how much you
•
are grinding, for a more precise seasoning.
Interchange the spice containers at will, season to taste.
•
MAINTENANCE AND CLEANING
Unplug the adapter before any routine maintenance or cleaning.
•
Disassemble the different parts of the appliance (motor block,
•
containers and lids) and clean them separately with a damp cloth.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
5
Assembly page 5/24
Team
Print only
PPG 40738 - 120501
Publicité
