Publicité
Les langues disponibles
Les langues disponibles
8467946
ASSEMBLY
When this manual refers to a part number, it refers to the included Parts List section.
WARNING! Remove the battery from the grass trimmer, before installing the tree guard,
safety guard and the edging wheel to avoid accidental activation and injury.
1. Insert the tree guard (#13) into the black slot on cutting head (#7). Note the direction
of the tree guard (Fig. 1). When In trimming mode, the tree guard should be like Fig. 2.
2. Locate the safety guard (#8) onto the cutting head and turn it a bit to make sure it
engages into the slots on the cutting head. Note to follow the arrow direction on the
safety guard (Fig. 3).
3. Fix the safety guard onto the cutting head with the screw out of the package (Fig. 4).
4. When in edging mode, the edging wheel needs to be fit on the trimmer. Insert the
edging wheel (#12) into the black slot piece on the cutting head (Fig. 5). Make sure the
edging wheel firmly connects with the slot. Push the tree guard so it does not protrude
(Fig. 6).
INSTALLING OR REMOVING THE BATTERY
Always switch off the tool before insertion or removal of the battery.
Installing the Battery
Align the notches in the base of the grass trimmer's handle (#3) with those of the battery (#10)
and slide the battery and grass trimmer together until the battery locks into place (Fig. 7).
Removing the Battery
Press down the battery release button (#15) and slide out the battery (Fig. 8).
Getting the best performance from the battery
The length of service from each charging cycle will depend on the type of work undertaken.
To obtain the longest possible battery life:
•
Store and charge your batteries in a cool area. Temperatures above or below normal
room temperature will shorten battery life.
•
Never store batteries in a discharged condition. Recharge them immediately after they
are discharged.
•
All batteries gradually lose their charge. The higher the temperature the quicker they
lose their charge. If you store your grass trimmer for long periods of time without
using it, recharge the batteries every month or two. This practice will prolong
battery life.
OPERATION
TRIMMING FUNCTION
WARNING! Do not try to adjust the telescopic shaft while the trimming line Is rotating.
Remove the battery from grass trimmer before performing adjustments.
1. Adjusting the Cutting Height.
Unscrew the lock sleeve on the shaft and adjust the length of the telescopic shaft (#5)
to the most comfortable operation position (Fig. 9). Turn the lock sleeve anticlockwise
to lock the shaft in position.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
10 in. Cordless Grass Trimmer
V 3.01
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
7
Publicité
