Publicité
Les langues disponibles
Les langues disponibles
V 3.01
GENERAL SAFETY PRECAUTIONS
Electrical Safety
WARNING!
To reduce risk of electric shock, be certain that the plug is connected to a properly
grounded receptacle.
1. Disconnect tool from power source before cleaning, servicing, changing parts/accessories or
when not in use.
2. Protect yourself against electric shocks when working on electrical equipment. Avoid body contact with
grounded surfaces. There is an increased chance of electrical shock if your body is grounded.
3. Do not alter any parts of the tool or accessories. All parts and accessories are designed with built-in safety
features that may be compromised if altered.
4. Make certain that power source conforms to requirements of your equipment.
5. Do not expose power tools to rain or to poor weather conditions. Water entering a power tool will increase
the risk of electric shock.
WARNING! All wiring should be performed by a qualified electrician.
Lithium Ion Battery and Charger Safety Warning
WARNING! Do not allow any liquid to get inside charger. Electric shock may result. To facilitate cooling of the
battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal
shed, or an uninsulated trailer.
WARNING! If the battery pack case is cracked or damaged, do not insert it into charger. There is a danger of
electric shock or electrocution. Dispose of the battery safely.
Before using the charger, read all instructions and cautionary markings on the charger, battery pack and the product
using the battery pack.
•
This charger is not intended for any uses other than charging rechargeable batteries. Any other use may
result in risk of fire, electric shock or electrocution.
•
Do not place any object on top of the charger or place the charger on a soft surface that may result in
excessive internal heat. Place the charger in a position away from any heat source.
•
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when
disconnecting the charger.
•
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress.
•
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could
result in the risk of fire, electric shock or electrocution.
•
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way.
Have it serviced or replaced.
•
Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is
required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
•
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning.
Removing the battery pack will not reduce this risk.
•
Never attempt to connect 2 chargers together.
•
Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104 °F
(40 °C), such as inside sheds or metal buildings in summer.
•
The charger is designed to operate on standard household electrical power. Do not attempt to use it on any
other voltage.
•
The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the
charging notes and procedures.
4
All manuals and user guides at all-guides.com
10 in. Cordless Grass Trimmer
8467946
For technical questions call 1-800-665-8685
Publicité
