Publicité
Les langues disponibles
Les langues disponibles
11. Programming Mode
This mode allows the user to assign cook times and power levels to the once touche button.
1) Open the door and press "1" pad for 5 seconds,the buzzer will sound once and enter to
Programming Mode.
2) "PROGRAM" displays. you can input the time you need.
3) Press "
Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%" to input the power level.
the screen
will display the related power. If the same button pressed twice, the power
will change to PL10. If no power chosen, "PL 0" is default.
Note: et the time
S
first,then choose the power.
4
) To change the cooking fators: If press "X2",
factor is
80%. "CF:
of the number buttons to set.
5) After setting the time and power, press "
When the program saved, "PROGRAM" display
6) If all the cooking time exceeds the MAX.time User Option 7, when press
"
" to save the program, the buzzer will sound three times briefly
tell you the time is no use. And then
The time set before will be no change.
7
) Close the door, the oven will turn back to Ready Mode.
If press "
" button during setting process, the oven turn to Door Open Mode.
The program that not saved will be lost. If there is program saved as memory procedure,
press the related number button, the saved program will start. If no saved program,
the buzzer will alarm when pressing number button and it will not work.
For example: set the program as memory cooking. Power level PL7 and cooking
time is 1 minute and 25 seconds.
Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.
Step 2: Press number button "3", the screen will display "P:03",After two seconds,
the screen will display the
Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
Step 4: Press "Med-Hi/70% " button,"
Step : Press "
5
the related program will start.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the aboved steps.
3. If press "
" at the last step, it will turn back to Ready Mode. The setting will be no use.
08
" displays. If you need to change the cooking
the screen
related
1:25
" to save. When use the program next time, just press "3",
1
the screen
will display "CF:XX". The default
", the cooking program will be saved.
s.
turn back to display "PROGRAM".
time " :30".
70
" displays. Setting finished.
15
18
factor
, just press one
to
Publicité
