Publicité
Les langues disponibles
Les langues disponibles
Countertop Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Installation
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents
Fig 1
12 inch(
30cm
)
4.0 inch(10cm)
4.0 inch(10cm)
OPEN
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
The l
1) Blocking the intake and/or outlet openings
can damage the oven.
2
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
3 Plug your oven into a standard household
)
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
4 Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from any vents on the oven.
2. The applicance can be installed
with a degree of overlap
The maximum overlap height is
) loosening screw
(A
then replacing screw in its place tightly.
) taking off four screws as shown in the pictur
(B
) putting installation board to the following location
(
C
then fixing screw just taking off tightly
(
Fig
ure
1
)
.
eft
side must be open.
(
Figure2
)
.
two
,Taking off installation board
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Fig 2
layers.
e.
7
10
A
C
B
Publicité
