Virax Viper M2X Manuel D'utilisation page 21

7 LED lamps
The LED ring switches on or flashes in different colours to notify the user of several states. It is accompanied with several beeps.
LED caption:
LED lit
LED flashing
LED off
Action
Starting the machine:
Press the start cycle trigger/button
for 0.5s.
Crimping:
Press and hold the cycle start trigger
/ button throughout the crimping
cycle.
Information messages
LED ring Time
1s
1s
4s
4s
4s
4s
/
4s
/
2s
4s
/
4s
/
4s
Sound
2 The LED ring switches on green for 1s and then
beeps remains on white. The battery is charged properly.
The machine is ready for crimping.
2 The LED ring switches on orange for 1s and then
beeps remains on white. The battery is charged weakly.
Nevertheless, the machine is ready for crimping.
2 The LED ring flasches red for 4s and then the
beeps machine stops. The battery is not charged enough to
perform a complete cycle. Change the battery.
1 beep Once crimping complete, the LED ring switches on
green for 4s and then remains on white. The
crimping cycle is performed properly.
4 Once crimping complete, the LED ring switches on
beeps red for 4s and then remains on white. The crimping
cycle is not performed properly.
4 During crimping, the LED ring flashes red and
beeps orange. The crimping cycle is not performed
completely. Keep your finger pressed throughout the
crimping cycle.
4 During crimping, the LED ring flashes red and
beeps orange. The machine detected no resistance (no
clamp or insert). It stops the cycle and returns to the
home position.
Fit a jaw or inserts.
The LED ring is lit in white. The machine is ready for
a crimping cycle. The white light illuminates the work
area.
4 The LED ring flashes orange. The machine indicates
beeps when maintenance is required in less than 1000
cycles.
Then, the LED ring is lit in white. The machine is
ready for a crimping cycle.
4 The LED ring switches on red and purple then the
beeps machine stops. The machine is locked. 20,000
cycles are reached. Maintenance is required.
4 The LED ring flashes red and white, and then the
beeps machine switches off. The ambient temperature is
outside the operating range (-10°C +50°C).
x 4 The LED ring switches on orange and then the
beeps machine stops. A motor issue requires an
intervention.
Description
EN
21