Virax Viper M2X Manuel D'utilisation page 16

2 Technical data
Model
Reference
Battery power supply
Power input
Force delivered by the machine to ensure crimping
Crimping capacity:
PER / PEX tubes:
Multilayer tubes:
Steel tubes (stainless or galvanised steel):
Copper tubes:
Jaw rotation
Weight (without battery ; without jaw / with battery ; with jaw)
Machine dimensions with battery ; without jaw
length / height / width (mm)
Carry case dimensions - length / height / width (mm)
Information on sound and vibration emissions
Sound emission:
Acoustic pressure level at operator's ears: L
Peak acoustic pressure level at operator's ears: LpPeak
Acoustic power level: LwA
Uncertainty K
pA
As per the NF EN ISO 15744 standard – tests on idle work cycles
Vibration emission
Weighted hand-arm acceleration values m/s
On the trigger
Estimated uncertainty
As per the NF EN ISO 20643 standard – tests on idle work cycles
NOTES:
• Read the instructions carefully before using this tool.
• The manufacturer reserves the right to improve his products and change their specifications without prior notice.
• The specifications can vary according to the country.
3 General safety warnings for the tool
WARNING:
▪ Read all the safety warnings and all the instructions. Failure to follow the warnings and instructions may lead to an electric
shock, a fire and/or a serious injury.
▪ Keep all the warnings and instructions to be able to refer to them later.
• In the warnings, the word "tool" refers to your battery-operated power tool.
3.1 Working zone safety
• Keep the working zone clean and well lit.
• Do not operate electric tools in explosive
atmospheres (flammable liquids, gas or dust).
• Keep children and any people present way from
the working zone.
3.2 Electrical safety
• Do not expose the tools to rain or damp
conditions.
• Do not tamper with the battery.
Keep the battery away from heat, sharp edges or
moving parts.
3.3 Safety
• Stay alert, watch what you are doing and use
common sense.
Do not use a tool when you are tired or are under
the influence of drugs, alcohol or medication.
16
pA
2
Poorly lit or untidy zones are sources of accidents.
Electric tools create sparks which may cause dust or smoke to catch fire.
Distractions may cause you to lose control of the tool.
Water entering the tool will increase the risk of electric shock.
A damaged battery increases the risk of electric shock.
Failure to pay attention even for a moment when using the tool may
cause serious injury.
VIPER M2X / L2X
2535XX
18V DC 2.0 Ah Li-ion 36 Wh
400 W
Max. 20 kN
Ø 12 to Ø 32/40 mm.
Ø 12 to Ø 32/40 mm.
Ø 12 to Ø 28 mm.
Ø 12 to Ø 28 mm.
360°
M2X : 1,85 kg / 2,25 kg
L2X :1,75 kg / 2,51 kg
M2X : 264 / 259 / 81
L2X : 322 / 121 / 81
M2X : 590 / 390 / 140
L2X : 590 / 390 / 140
69 dB (A)
<130 dB (C)
73 dB (A)
3 dB
2
0.29 m/s
2
0.05 m/s
EN