Publicité
Les langues disponibles
Les langues disponibles
45° ° ° °
•
Loosen the locking knob for depth setting and raise up
the cutting arm.
•
Loosen the lock knob for the mitre (1). Angle the
cutting arm until the screw (2) bottoms at the guide
end plate.
2
•
Check the angle, 45° and if needed loosen the lock
nut and adjust the screw (2) until it bottoms at the
guide end plate.
2
ASSEMBLING AND ADJUSTMENTS
1
45
22,5° ° ° °
•
Loosen the locking knob for depth setting and raise up
the cutting arm.
•
Loosen the lock knob for the mitre (1). Angle the
cutting arm until the markings for 22,5° are opposite
each other (2).
•
Check the angle, 22,5° and if needed adjust the
triangular shaped marking (2).
2
1
2
1
22,5
67,5
English
–
11
Publicité
