Black & Decker BDH2010LP Manuel D'instructions page 4

1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Nozzle
6. Nozzle release button
7. Nozzle rotating button
8. Extendable crevice tool
9. Flip-up Brush
10. Charger base
11. Charger
12. Cloth filter
13. Plastic pre-filter
14. Wall mount bracket
(BDH2010LP)
Charging the battery
WARNING:
below 39°F (4°C) or above 104°F (40°C).
The charge is complete when the charging indicator
lights will turn off. The charger and the battery can be
left connected indefinitely.
• Place the appliance on the charging base as shown.
• Plug in the charger. The charging indicator LED will
illuminate.
• Leave the appliance to charge.
While charging, the charger may get warm, this is
perfectly normal and safe. The charging indicator will
be lit as long as the appliance is charging. It can remain
on charge indefinitely without damage or danger. It is
not possible to "overcharge" the battery cells with the
charger provided.
Product Features
Do not charge the battery at ambient temperatures
4
A