Publicité
Les langues disponibles
Les langues disponibles
•
Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. It will have to be checked by
an Authorized Technical Service Centre before it can be used again.
•
During breaks in ironing, leave the appliance in the vertical position.
•
Never leave the hot iron on textiles or materials which could burn easily.
•
Never rest the iron on the electrical connection cable.
•
Do not use the iron if the cable becomes frayed.
•
Do not immerse the iron in water or any other liquid.
•
Unplug the iron from the mains supply before filling it with water, or before pouring out the remaining water after use.
•
When the ironing is finished unplug it from the mains and empty out the water tank.
•
Do not unplug it by pulling on the cable, nor leave the plug hanging freely.
•
If you have to leave the room where you are ironing, then switch the iron off and pull the plug out off the wall socket.
•
With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains
cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre.
Description
About your Steam iron:
1.
Spray nozzle
3.
Steam regulator + Self Clean
5.
Spray button
7.
Pilot lamp
9.
Water tank
Instructions for use
2.
Water tank cover
4.
Super Steam button
6.
Temperature regulator
8.
Soleplate
English
2
Publicité
