Zycoo SQ10 Guide D'installation Rapide page 3

English
Network Settings
1
The Network Square Speaker SQ10 uses DHCP as the default IP assignment method. If
you would like to change DHCP to static IP before installation, please first power it on using
a power adaptor or a PoE-enabled network cable. Wait for 30s, then press and hold the IP
broadcast button from the front panel to listen to its IP address. If the DHCP server is not
available or DHCP fails, the default IP address 192.168.1.101 will be used.
2
Insert the IP address in the browser address bar to open the web interface, use default login
credentials, admin/admin, to sign in. Go to Settings -> Network Settings page to set up
static IP.
Installation method
1
2
3
4
1