Costway FP10180US Mode D'emploi page 5

Heater Control
Press the heater control to turn on and off the heater.
When the heater is turned on, press and hold the heater control button
for 5 seconds to enter temperature adjustment mode. The LED indicator
is red. In adjustment mode, the display will flashes. There are 22 levels to
change Fahrenheit temperature (ON, 62°F 82°F). After this is set, the
display will flash 5 times and exit from setting status.
To switch from degree Fahrenheit to degree Celsius, press and hold the
power button for 5 seconds when the heater is turned on. The LED
indicator will turn to green. There are 12 levels to change Celsius
temperature (ON, 17°C - 27°C). Repeat the same process to convert
Celsius to Fahrenheit.
NOTE: Degree Fahrenheit will be displayed in RED and degree
Celsius will be displayed in Green.
Timer Control
Press the timer button to turn the timer on. The timer function can
controls both the flame effect and heater.
The timer can set as the table suggested below.
Button Press
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
08
Timer Interval
30 Minutes
1 Hour
2 Hours
3 Hours
4 Hours
5 Hours
6 Hours
OFF
NOTE: Timer only controls heater if only the heater is on before
timer is set.
NOTE: Timer only controls flame effect function if only the flame
effect function is on before timer is set.
NOTE: Timer can control both heater and flame effect function if
both are on before timer is set.
USER INSTRUCTION (REMOTE CONTROL)
Power Button
Flame Control
Heater UP/Down
Display
30
1h
2h
●Dispose old / used battery at a suitable recycling point or
3h
4h according to local regulations.
5h
●DO NOT ingest battery. If accidentally swallowed, seek for
6h
medical help immediately.
None
Heater Control
Timer Control
CAUTION/WARNING
09