Publicité
Les langues disponibles
Les langues disponibles
USER INSTRUCTION
Before use
Check that the air intake and exhaust is not covered or obstructed in
anyway.
Keep combustible objects at least 3 ft/ 0.9 m away from the unit. Plug the
unit to a grounded power socket.
Grounding
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electric shock.
This unit comes standard with a 6ft (1.8m) long, three wired cord. Always
plug the unit into a wall outlet. An extension or relocate tab should never
be used.
CAUTION/WARNING
●Improper connection of the equipment grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the
product is properly grounded.
●DO NOT modify the plug provided with the product nor using
any bypass device if the plug does not fit the outlet. Have a
proper outlet installed by a qualified electrician.
06
USER INSTRUCTION (CONTROL PANEL)
B
Flame
Control
Timer
D
Control
Control Panel
The control panel is located on the top right corner of the unit.
Power ON / OFF
Press the power button to turn on the unit. Press again to turn off the
unit.
NOTE: There is a thermostat limiter inside the unit. When the inner
temperature is too hot, the unit will automatically turn off to avoid damage
to the product or risk of fire.
DO NOT unplug the unit when it is still "ON"
•
Flame Control
Press the flame control button to rotate and set flame effect levels. The
flame settings are as follows.
Level
L1
L2
L3
Flame
red
Green
Yellow
Power
A
Button
Heater
C
Control
E
Display
L4
L5
L6
L7
Purple
Cyan
Cyclic
OFF
07
Publicité
