Oregon Scientific BAR310HG Mode D'emploi page 8

RECEPTION SIGNAL
To enable and force a signal search:
Press and hold for 2 seconds.
To disable the signal reception:
Press and hold for 2 seconds.
Clock signal reception indicator:
STRONG WEAK
SIGNAL SIGNAL
SET CLOCK
If the clock signal reception is enabled and a signal is being
received the clock does not need to be manually set..
1. Press and hold MODE for 2 seconds.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone offset, 12/24 hr format,
hour, minute, year, day/month format, month, day and
language.
NOTE
The time zone offset can be used to set the clock
up to + / - 23 hours from the received clock signal time. If
you have disabled the clock signal reception (i.e. manually
setting the clock), do not set a value for time zone offset.
NOTE
The language options are English (E), German (D),
BAR310HG_IM_EN_R5.indd 6
All manuals and user guides at all-guides.com
NO SIGNAL
P/N:086L004521-071 REV1
8/88
French (F), Italian (I), and Spanish (S).
Press MODE to choose between the following display
modes:
• Clock with seconds.
• Clock with weekday.
• Clock with calendar.
• Clock with time zone offset.
ALARM
To set the alarm:
1. Press to enter alarm mode.
2. Press and hold
3. Press / to set hour / minute.
4. Press to confirm.
To activate / deactivate the alarm:
1. Press to display alarm time.
2. Press again to turn alarm ON / OFF.
To silence the alarm:
•
Press SNOOZE to silence it for 8 minutes
OR
•
Press any key except SNOOZE to turn the alarm off
and activate it again after 24 hours.
6
for 2 seconds.
indicates alarm is ON.
2006.11.9 10:46:31 AM