Publicité
Les langues disponibles
Les langues disponibles
CLEANING AND MAINTENANCE
CLEANING
Clean the shield(s) and/or blower housing(s) in a sink of warm soapy water (liquid dish detergent)
and let soak for a few minutes. Wash with a sponge or dishcloth, rinse and let drain before
reinstalling. Alternatively, the blower housing(s) and blower shield(s) may be placed into a
dishwasher.
1
Item #
Description
1
Motor housing
2
Wheel
3
Blower housing
4
Blower shield
To reduce the risk of personal injury, be sure the power is turned off in the hood before removing
the shield(s) and blower housing(s).
Regular cleaning of the blower housing should prevent grease accumulation on the blower wheel.
If grease build-up should occur, the blower wheel may easily be cleaned in place using a soft bristle
toothbrush and a common degreaser such as Formula 409®.
Take care not to move or lose the metal balancing clips that may be affixed to the wheel.
Item #
Description
1
Balancing clip
2
Blower wheel
All manuals and user guides at all-guides.com
2
(CONT.)
3
4
1
2
©2018 Hestan Commercial Corporation
EN
7
Publicité
