Publicité
Les langues disponibles
Les langues disponibles
ND 1075-1 61-360 Instructions
WARNING! (cont.)
7.
Before breaking a circuit for testing, turn off the power to
the circuit. When disconnecting from a circuit, discon-
nect the hot lead first, then the common lead.
8.
Disconnect the meter from the circuit before turning off
any indicator, including motors, transformers,and sole-
noids.
Overload Protection
V
+ V
200mV range
AC
DC
>200mV range
A
+ A
mA input
AC
DC
10A input
Ohms (Ω)
Diode
Continuity
Unit of Measure Multipliers
For your reference, the following symbols are often used to
make measurement easier:
Symbol
Verbal
M
mega
K
kilo
m
milli
µ
micro
To Measure AC Voltage:
1.
Plug the test leads into the meter inputs as indicated in
the diagram below.
2.
Select the proper range to be used within the VAC area.
3.
Connect the meter in parallel with the load or circuit.
4.
Measure AC voltage.
Page 3
All manuals and user guides at all-guides.com
3/9/06
4:51 PM
Page 3
Meter Setup:
500VDC/350VAC
for 15 sec
600VDC/600VAC
0.5A/250V
Function Range Resolution
10A/600V
AC Voltage 200.0 mV
500VDC/500VAC
500VDC/500VAC
500VDC/500VAC
To Measure DC Voltage
1. Plug the test leads into meter inputs as indicated in the dia-
Multiplier
gram on the next page.
X1,000,000
2. Select the proper range to be used within the VDC area.
X1,000
4. Connect the meter in parallel with the load or circuit.
÷1,000
5. Measure DC voltage.
÷1,000,000
AC VOLTAGE
Circuit Connection:
Red
Black
Accuracy
.1 mV
2000 mV
1mV
50 to 500Hz
20.00 V
.01 V
≤ 20 V range ±(1% +4)
200.0 V
.1 V
≤ V range ±(1.5% +4)
600 V
1 V
DC VOLTS
Meter Setup:
Circuit Connection:
Red
Black
Page 4
Publicité
