Intel Express 410 Guide De L'utilisateur page 5

Optional Information
How to Change Port 1
4
from MDI-X to MDI
• All ports on the switch are MDI-X.
Press the MDI/MDI-X button to change
port 1 to MDI so you can connect to
another switch or hub using a straight-
through cable.
Access the
5
Configuration Screen
• Connect your PC to the Management
module's serial port using the null-modem
cable (included).
• Set a VT100-compatible terminal emula-
tion program (such as HyperTerminal*) to
these parameters:
- 9600 baud
- No parity
- No flow control
Press E to connect to the Configura-
tion screen.
• Navigate the screen with these keys:
T
B
z
c + S
c + R
• <Auto> is the default setting for the ports.
You only need to configure the port
settings if you are having difficulty
connecting to a device.
All manuals and user guides at all-guides.com
- 8 data bits
- 1 stop bit
Move to next item.
Move to previous item.
Toggle options within a field.
Save changes to configuration.
Repaint the screen.
®
Intel Express 410T Standalo
MDI
1 2
MDI-X
MDI/MDI-X
button
Configuration Screen: Items enclosed with angle
brackets < > indicate a toggle field. Use the z to
toggle selections.
Speed Auto = all port settings are
automatically negotiated.
100 = port set to 100Mbps.
10 = port set to 10Mbps.
Duplex Half = port set to half duplex.
Full = port set to full duplex.
– = port set to auto mode.
Flow enable = flow control is enabled in half
Control duplex mode (back pressure).
disable = flow control is disabled in full
duplex mode.
– = port set to auto mode.
3 4
MDI
MDI-X
3