Legamaster XTX-7500UHD Mode D'emploi page 9

3.2. INCLUDED ACCESSORY
Item
IR Remote Control (Batteries Included)
IR Extender
HDMI Cable
USB Type B to A
Power Cord
USB Stick (User manual included)
Bag with EasyFix cable clips
Legamaster Ergonomic stylus
4. INSTALLATION
4.1. ENVIRONMENT STATE
When operating the XTX series display, ambient room
conditions should not exceed the following:
4.2. POWER INPUT
The power cord (shipped separately) is used to connect the display to an AC wall outlet. Plug the power cord
into the AC inlet on the side of the display. Locate the Main Power switch directly above the AC inlet and press
"-" to turn power on, and "O" to turn power off.
Status LED / Light Sensor /
IR Receiver
OSD
control
panel
PACKAGE CONTENTS / INSTALLATION
• Operating temperature: -5˚C to 45˚C
• Humidity: less than 90% RH (Max)
(41˚F to 104˚F)
Main power –
Switch
AC In socket
XTX-7500 – USER MANUAL – ENGLISH
"I" is power on
"O" is power off
9